User's Manual

are interconnected across the network, they can pass commands to each other as long as they are within
network range of each other.
Remote Control Setup
When you select a group on the remote control, the group remains the active group on the remote
control. To take action on that same group again, you do not have to press the group button again.
Connecting a New or Pre-existing Remote Control
The remote control in your lighting kit is already connected to your Lighting Gateway by default.
If you are adding a new remote control to your network or if you are upgrading your lighting network from
a remote control kit and would like to use the old remote control with your new network, refer to the user
guide that was included with your device for further information.
Product Specifications
Connected Lighting User Guide | 22