User's Manual

If the application does not find a Lighting Gateway, it opens a login page for you to enter your user name
or email address and password. Once logged in, you can manage your lighting network the same way as
if you were connected locally.
If your application does find a Lighting Gateway, it connects to the lighting network attached to that
Lighting Gateway. For example, if you are at a friend’s home and they have a similar lighting kit set up,
your application will connect to their lighting Gateway if your friend gave you access to log in to their
home network. You would connect to their local network through their wireless router.
To access your own network remotely, you would have to log off of the application and then log in again
using your online account information.
To do so:
68. When you start the application, tap the Settings menu at the bottom of the page.
69. On the Settings page, tap Log Out. The application logs you off of the current network and
opens the login page for you to log in to your own account.
70. On the login page enter your user name or email address and password, and then tap
Login.
71. Manage your lighting network as if you were connected locally.
Forgotten Password
If you forget your password, you can reset it:
72. Access the login page.
73. Tap Login without entering your user information. When your login attempt fails, the Reset
Password page opens.
74. Type the email address associated with your account. This is the same as your user name.
Tap OK. A confirmation email is sent to your email address.
75. When you receive the confirmation email, click the link to approve the password reset and
specify a new password.
Product Specifications
Connected Lighting User Guide | 20