User's Manual

d. Tap Select Additional Bulb to add each of the light bulbs you want to include in
the fixture.
59. When you finished setting the fixture properties, tap Save.
Editing a Light or Fixture
Before starting this procedure, make sure the light or fixture you are editing is powered on.
To edit a light or fixture on your network:
60. Tap the Settings menu, then tap Your Lights & Fixtures.
61. On the Lights & Fixtures page, tap the light or fixture you want to edit.
The Light/Fixture page opens. The selected light or fixture begins to dim and brighten to
help you physically identify it.
62. Tap any of the items, such as name, room, or remote, that you want to edit and make your
changes.
63. When you are finished with your edits, tap Save.
Removing a Light or Fixture from Your Network
Before starting this procedure, make sure the light or fixture you are removing is powered on.
To remove a light or fixture from your network:
64. Tap the Settings menu, then tap Your Lights & Fixtures.
65. On the Lights & Fixtures page, tap the light or fixture you want to remove.
The Light/Fixture page opens. The selected light or fixture begins to dim and brighten to
help you physically identify it.
66. Tap the Delete button.
67. When prompted, confirm that you want to delete the light or fixture.
Removing a Light Bulb Manually
If your smart device is not available, you can remove a light bulb from the network by turning power to the
light fixture off and on three times consecutively to reset the light bulb.
During this process, leave the power off for at least two seconds and then on for one to two seconds.
After the third cycle, leave the power on. When the light bulb has been removed from the network, it
brightens and dims continually.
Remote Access
You can access your lighting network remotely using your online account. When you start the application,
it automatically tries to find a Lighting Gateway on any network to which you may be connected.
Product Specifications
Connected Lighting User Guide | 19