User's Manual

5. When the Lighting Groups page opens, tap the lighting group numbers to add or remove
the light bulb from those lighting groups. The light bulb belongs to a lighting group when the
number is shaded. This number corresponds to the group number on your remote control.
You can add the light bulb to as many as all four lighting groups.
Managing Lights and Fixtures
Adding Light Bulbs to Your Network
If you add a new light bulb to your network, you must connect to and set up that light bulb. For additional
information, refer to the user guide that was included with your device.
Creating a Fixture
You can set up any grouping of light bulbs to operate as one multi-socket light fixture. Typically you would
use this feature to set up an actual multi-socket light fixture.
However, you could also use it in cases where you have multiple lights that you want to behave as a
multi-socket light fixture. For example, you might have two separate desk lamps that you want to control
together. You could create a fixture that includes both of them and control them together as if they were
part of one light fixture. Then you could perform tasks on that fixture, such as turn it on or off, dim or
brighten the lights, or create a Smart Control that controls it.
To create a fixture:
55. Tap the Settings menu at the bottom of the page. The Settings page opens.
56. Tap Your Lights & Fixtures.
57. Tap Create New Fixture.
58. On the Fixture page:
a. Tap Choose Name to type a name for your new fixture.
b. Tap Choose Room to select or create the room where your fixture will be located.
c. Tap Do you have a remote? to configure your remove to control the lights.
Product Specifications
Connected Lighting User Guide | 18
Unselected Lighting
Group
The light bulb does not belong to a
lighting group if the number is not
shaded.
Selected Lighting
Group
The light bulb belongs to a lighting
group if the number is shaded. The
number corresponds to the group
number on your remote control.