User's Manual

Default Smart Controls
The Smart Control page includes a set of default Smart Controls that come preconfigured within the
application:
•
Home - typically used when people return home after being away.
This Smart Control turns on any light, along with their most recent dimmer level, that was
previously on when the Away Smart Control was activated. For example, when everyone left the
house.
•
Away - typically used when everyone leaves the house. For example, when going to school or
work for the day.
This Smart Control saves the current state of the lights on your network (whether they are on or
off and what dimmer level they might be at) and then turns off all lights. Saving the current state
of your lights to make it easier for you when you return home and activate the Home Smart
Control.
•
Night - typically used when everyone goes to bed for the night.
This Smart Control turns off all lights on your network. Unlike the Away Smart Control, the Night
Smart Control does not remember the state of your lights before turning them off.
Custom Smart Controls
In addition to the default Smart Controls, you can create your own custom Smart Controls. There are two
types of custom Smart Controls:
Product Specifications
Connected Lighting User Guide | 14
Smart Control menu
Tap to access this page.
Default Smart
Controls
Home, Away, and Night are
default Smart Controls that
come preconfigured.
Custom Smart
Controls
Swipe the arrow to edit the
settings of a custom Smart
Control or to access the delete
feature to remove the custom
Smart Control.
Smart Control list
Tap to activate the corresponding
Smart Control.
Create Smart Control
Tap to start wizard to create your
own custom Smart Control.