User's Manual

Smart Device Application
The smart device application makes working with your Connected Lighting easy by allowing you to use
your smartphone, tablet, iPod touch, or TV to set up, manage, and control your lights. You can configure
lights into rooms and lighting groups, turn lights on and off, set up Smart Controls to automatically control
lights, and much more.
Network Connection
When you start the smart device application, it automatically searches for your Lighting Gateway through
your wireless router and connects to the lighting network.
If your smart device does not find a local Lighting Gateway, it tries to access your Lighting Gateway
remotely. For your smart device to connect remotely, you must have an online account and your Lighting
Gateway must be connected to the Internet through your router.
Note: This connection process applies to any local network and Lighting Gateway in range of your smart device. For
example, if you are at a friend’s home and they have a similar lighting kit set up, your smart device application will
connect to their lighting Gateway if you are connected to their local network through their wireless router (which
means your friend would have given you access to log in to their home network). To access your own network
remotely, you would have to log out of the application and then log in again using your online account information.
Lights and Fixtures
You can control your lighting network from your smart device by accessing the Lights and Fixtures page.
This page shows all of your light bulbs and fixtures available on your lighting network, sorted by rooms
and room colors.
Product Specifications
Connected Lighting User Guide | 12