User's Manual

•
The Lighting Gateway automatically stops the search process in two minutes after finding the
most recent light bulb.
27. If a light fixture has a dimmer control (not recommended), set the dimmer level to full
brightness.
28. Leave the light fixture switches ON so that power is available to the light bulbs.
Step 7: Set up Light Bulbs in Application
With your light bulbs, Lighting Gateway, and application installed, you can use your smart device to
set up the lights on your network:
29. Open the application on your smart device. The application automatically finds the light bulbs
connected to the Lighting Gateway and prompts you to set them up:
30. Tap Yes. Your smart device then walks you through setting up each new light bulb.
Look for the light bulb that is dimming and fading. This is the light bulb you are currently
configuring on your smart device.
31. Follow the setup wizard through specifying a name light, assigning a room for the light, and
selecting an icon or taking a picture of the light to help identify the light.
32. Repeat these steps for each flashing light bulb.
Note: If you skip setting up light bulbs during installation, the light bulbs are automatically grouped under the black
room color. You can update the light bulb settings any time using the information in the Smart Device Application
chapter.
Step 8: Prepare the Remote Control Optional
If you will be using the remote control with your lighting network, then you must first prepare it for use.
For additional information on using the remote control, refer to the Remote Control chapter.
Perform these steps:
33. Remove the battery compartment cover from the back of the remote control.
34. Insert two AA alkaline batteries (included).
The first time you insert batteries, the primary indicator light flashes while the remote control
determines the best signal for your lighting system. The indicator light remains on for
approximately five seconds. When the indicator light turns off, your remote control is ready.
Congratulations! You have now installed and configured your Connected Lighting system. Now you can
schedule and manage your lighting system using Smart Controls and remote control.
Product Specifications
Connected Lighting User Guide | 11