User's Manual

7. Verify that the Lighting Gateway is connected by checking the power indicator light is white.
Step 3: Download and Install the Smart Device Application
The smart device application installs like other applications you may already have.
To download the app:
8. At the application download site for your device, search for TCP Lighting. Download and
install the app.
9. Make sure your smart device is connected to and in range of your wireless router, and then
start the application on your smart device.
When the application starts, it automatically searches for your Lighting Gateway through your
wireless router and automatically connects to the associated lighting network.
Note: For future connections, if your smart device does not find a local Lighting Gateway, it will try to access your
Lighting Gateway remotely using the mobile data connection.
Step 4: Set up Lighting Gateway
The Lighting Gateway automatically scans and connects to your Wi-Fi network. You just need to confirm
the connection.
Perform the following steps:
10. Tap the Settings menu for the smart device application. The Account Information page
opens.
11. In the Username field, enter your email address, then tap OK.
12. Enter your password, then tap OK. A message opens when your account is created
successfully.
13. In the URL field, verify the URL,
14. Slide the Gateway Discovery field to ON. The Smart Device application automatically
discovers your Lighting Gateway.
15. Follow the instructions on your smart device to complete the setup.
Product Specifications
Connected Lighting User Guide | 9