User's Manual

58
3. On the remote control, press and hold the Program button.
4. While pressing the Program button, press the 1-4 button three times consecutively.
5. Release the Program button. The primary indicator light on the remote control flashes while the remote
control connects with the Gateway. When this process is complete, the indicator light will remain on for
approximately five seconds. When the indicator light turns off, your remote control is connected to the
Gateway.
Turning Lights on and Off
To turn lights on and off, you must turn on and off an entire lighting group:
1. Press the Group Number button for the lighting group you want to turn on or off. If you want to turn on
or off ALL lighting groups, press the 1-4 button.
2. Press the On/Off button. If the lights were previously off, they will turn on. If the lights were previously
on, they will turn off.
Note: The previously selected group (or all groups, if selected) remains the active group on the remote control. To take action
on that same group again, you do not have to press the group button again.