User's Manual

38
color for the new bulb. However, if you skip the setup wizard process, the light bulb remains grouped under the
black room color. You can move a light bulb to a different room and room color at any time (refer to the Settings
section later in this chapter).
Managing Lighting Groups
???TO DO - When added to app???
Managing Lights and Fixtures
Adding Light Bulbs to Your Network
When you first set up your lighting network, the application walks you through setting up all of the light bulbs in
your kit. If you add a new light bulb to your network, you must connect to and set up that light bulb. When you
perform this procedure to add new light bulbs, be sure you can access your Gateway since it is part of the
installation process. The following procedure allows you to add one or more light bulbs:
1. Turn power OFF to the light fixtures where you will be installing the new network light bulbs.
2. Remove any existing standard light bulbs from the light fixtures.
3. Install the new network light bulb into the light fixtures as you would any standard light bulb.
4. Turn power on to the light fixtures. The light bulbs will brighten and dim while attempting to connect
wirelessly to your Gateway.