User's Manual

24
2. Tap Yes. Your smart device then walks you through setting up each new light bulb.
3. Look for the light bulb that is dimming and fading. This is the light bulb you are currently configuring
on your smart device.
4. The setup wizard guides you through specifying a name light, assigning a room for the light, and
selecting an icon (or taking a picture of the light) to help identify the light.
5. Repeat these steps for each flashing light bulb.
Note: If you skip setting up light bulbs during installation, the light bulbs automatically get grouped under the black room color.
You can update the light bulb settings any time using the information in the Smart Device Application chapter.
6. Prepare the Remote Control (Optional)
If you will be using the remote control with your lighting network, then you must also prepare it for use. Refer to
the steps in the Remote Control chapter. Also, if you are upgrading from a remote control lighting kit, then you