User's Manual

48
Connected Lighting
Editing a Light or Fixture
Before starting this procedure, make sure the light or xture you are editing is powered on. To edit a light or
xture on your network:
1. Tap the Settings menu at the bottom of the page.
2. When the Settings page opens, tap Your Lights & Fixtures.
3. When the Lights & Fixtures page opens, tap the light or xture you want to edit. The Light/Fixture
page opens and the selected light or xture begins to dim and brighten to help you physically
identify it.
4. Tap any of the items you want to edit (such as the name or room), and make your edits.
5. When you are nished with your edits, tap Save.
Removing a Light or Fixture from Your Network
Before starting this procedure, make sure the light or xture you are removing is powered on.
To remove a light or xture from your network:
1. Tap the Settings menu at the bottom of the page.
2. When the Settings page opens, tap Your Lights & Fixtures.
3. When the Lights & Fixtures page opens, tap the light or xture you want to remove. The Light/
Fixture page opens and the selected light or xture begins to dim and brighten to help you
physically identify it.
4. Tap Delete.
5. When prompted, conrm that you want to delete the light or xture.
Removing a Light Bulb Manually
If your smart device or Web browser are not available you can remove a light bulb from the network by turning
power to the light xture off and on three times consecutively to reset the light bulb. During this process, leave
the power off for at least two seconds and then on for one to two seconds (after the third cycle, leave the
power on). When the light bulb has been removed from the network, it will brighten and dim continually.