Manual
5
USING YOUR PUREWASH
Daily Use
Using pureWash is very easy. You simply operate your washing machine according to the
instructions provided by the manufacturer. The only difference is that you ONLY use
the cold water setting on your washer. If hot water is used it dilutes and defeats the
effectiveness of the oxidizers that the pureWash has introduced into the wash water.
Non-Use or Vacation Care
IMPORTANT: To avoid possible property damage due to ooding, turn off the water
supply to pureWash Pro whenever there are periods of non-use such as when you are on
vacation. Operate your washer and pureWash only when you are at home.
Stains
We suggest that you pre-treat stains just as you would without a pureWash. However, for
normally soiled laundry, you should only need a very small amount of detergent or none at all.
How to tell pureWash is Working
You can easily tell if pureWash is operating properly by viewing the water as it ows through the clear
tube behind the window on the unit. Bubbles should be visible in the water as it ows through and
the window should emit a blue glow. If you do not see bubbles, please ensure that you have the
proper Venturi Setting (Using the Flow Rate Dial) selected for your washing machine. High-efciency
or front load washers should use the Front Load Setting, but standard-efciency top-loading washers
should use the Top Load Setting. If the Top Load Setting is used on a high-efciency washer, there
likely will be no bubbles and you will not experience the benets of using pureWash.