Owner’s Manual
SNUG OF CONTENTS About pureHeat SNUG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Contents . . .
ABOUT PUREHEAT SNUG pureHeat SNUG is a tiny powerhouse of reliable, efficient infrared heat. By mounting your heater directly onto an electrical outlet, you save valuable floor space and avoid long cords that can clutter your room. Use the adjustable digital thermostat to set the target temperature to your comfort level, the same way you set your central heating thermostat. The PTC heating element is selfregulating to heat your room quickly and remain at your desired comfort level.
PRODUCT CONTENTS 1 - Owner’s Manual 1 - pureHeat SNUG Unit 1 - Power Cord Attachment WARNINGS For your safety and the safety of the product, please read through the warnings below before beginning installation, use, or maintenance. • Disconnect power before cleaning or servicing. • Connect to properly grounded outlets only. • Do not block the Front Grill or Side Air Intakes. • pureHeat SNUG is for indoor use only. • Do not insert any foreign objects into the Front Grill or Side Air Intakes.
UNIT DIAGRAM Front Grill DO NOT COVER Power Outlet Power Switch Power Outlet Rear Plugs CONTROL PANEL DIAGRAM Mode Button MODE (Fan Speed) TIMER COOLER Timer Button WARMER Temperature Down Button 5 Temperature Up Button
SETTING UP SNUG INSPECT THE UNIT FOR DAMAGE BEFORE SETUP OR USE. 1. Remove pureHeat SNUG from the packaging. 2. Find an unobstructed outlet to place pureHeat SNUG. FOR YOUR SAFETY, READ ALL WARNINGS & CAUTIONS (PAGE 4) AND USAGE (PAGE 6-7) BEFORE USING PUREHEAT SNUG. PUREHEAT SNUG WILL NOT WORK WITH A GFCI OUTLET. Plug Orientation If your desired outlet is upside down, follow these instructions to easily switch the plug orientation on your pureHeat SNUG to accommodate it. 1.
USING SNUG (Continued) READ ALL WARNINGS & CAUTIONS (PAGE 5) BEFORE USING YOUR PUREHEAT SNUG. Modes Changing your MODE adjusts the fan speed output, which changes the effective heating range of pureHeat SNUG. Press the MODE BUTTON on the control panel to switch between ‘LOW’ and ‘HIGH’ Mode. Temperature Use either the COOLER or WARMER BUTTONS on the control panel to adjust pureHeat SNUG to your desired temperature.
MAINTENANCE Your pureHeat SNUG should be maintenance free for many years, but sometimes the unexpected happens. If you have any trouble with your unit, contact GreenTech Environmental by phone or visit www.GreenTechEnv.com/Support. CLEANING DISCONNECT YOUR PUREHEAT SNUG FROM THE OUTLET BEFORE CLEANING. 1. Remove particulate that may have gathered in the HOT AIR OUTLET using a vacuum with a brush attachment. 2.
LIMITED WARRANTY INFORMATION Your pureHeat SNUG (Product) is warranted to be free from all defects in material and workmanship in normal household use for a period of 1 Year from date of purchase. The warranty is granted only to the original purchaser. The warranty is subject to the following provisions: Any damages or malfunctions caused by negligence, abuse, or use not in accordance with the Product Owner’s Manual are not covered by this warranty.
NOTES 10
NOTES 11
www.GreenTechEnv.
