Owners Manual
ES20LXR
1952093315 REV 0
© 2022 Greenlee Tools, Inc.
Error
Code
Meaning Action
1 Over current fuse Seek Service
2 Over current comparator Seek Service
3 Overheated circuit board Cool Tool
4 Overheated battery Cool Battery
5 Battery empty: operation stops Charge Battery
6 Faulty cut; complete cycle Seek Service
7 Faulty cut; incomplete cycle Seek Service
8 Low battery Charge Battery
9 Battery empty Charge Battery
10 Real-time clock battery low Seek Service
11 Tool deactivated Seek Service
12 Service necessary Seek Service
13 Real-time clock not found
Re-insert Battery
Seek Service
14
Wireless Bluetooth
®
unit not
found
Re-insert Battery
Seek Service
15 [Not Used]
16 Pressure sensor not found Seek Service
17 Pressure exceeded Seek Service
18 Battery temperature too low Warm Battery
21 Remote control battery low Replace Battery
• Remove battery before touching the cutting
head or attaching/removing the hot stick
adapter. Your ngers or hands can be crushed,
fractured, or amputated if they become caught in
the tool head or between the tool head and other
objects.
• Maintain this tool according to these
procedures. Do not perform any maintenance
other than as described in this manual. Personal
injury or damage to the tool may result.
• Do not modify tool. Modifying the tool in any
manner may result in personal injury and damage
to the tool. A tool with a cutting head that has been
welded, ground, drilled or modied in any manner
can break during use and throw parts that could
result in severe injury or death.
Maintenance
Remove battery before performing any maintenance.
Clean the housing with a damp cloth and mild detergent
after every use. Allow tool to dry completely before
replacing battery.
Do not attempt to open the tool. It contains no user-
serviceable parts.
At either 3 years or 10,000 cycles, schedule a factory
service maintenance. Factory service includes general
inspections, replacement of tool’s di-electric hydraulic oil
and testing of tool by trained technicians.
When the Factory Service Date is approaching or arrived,
contact Greenlee Customer Service. Expedited shipping
is available.
• Tool service must be performed only by qualified
repair personnel. Service or maintenance
performed by unqualied personnel could result in
a risk of injury.
• When servicing a tool, use only identical
replacement parts. Use of unauthorized parts or
failure to follow service instructions may create a
risk of electric shock or injury.
Service
Repair Kits
CAT # Description
BTC3-CK BHT CONV KIT
BTC3GL REMOTE CONTROL, BHT CONTROL
BTC3-TJ HOT STICK ADAPTER
52177 BATTERY, 18V LI ION 2.0AH(PKG)
52178 CHARGER, BATTERY 120V (PKGD)
52179 CHARGER, BATTERY 230V (PKGD)
52180 CHARGER, BATTERY 12V (PKGD)
CP1 POUCH (PKGD)
Optional Equipment and Repair
Parts
Transportation & Storage
Remove tool from hot stick and the battery from the tool
before transporting or storing. Store tool in a cool, dry
place in the provided case with the remote.