Specification Sheet

ManualsBrandsGreengate ManualsAccessories20 Amp 120/277-Volt Heavy-Duty Switchpack Compatible with Magnetic/Electronic Ballasts

Technical Data

Effective March 1, 2018

SP15 & SP20 – Heavy Duty

Switchpacks

Overview

Switchpacks provide 15 VDC operating voltage to all low voltage,

15 VDC occupancy sensors and daylighting controllers. A single

switchpack can provide power for up to five sensors. Up to ten

switchpacks can be connected to one sensor for control of multiple

circuits. Isolated contacts may also be used to control HVAC,

contactors, motors, etc.

Features

Replaces separate transformers and relays

Zero-crossing circuit provides increased durability, especially with

today’s high inrush loads

Capable of switching up to 20 Amps

Suitable for Plenum use

Rated for Ballast, Tungsten and Motor Loads

LED ready

Catalog# Prepared by

Project Date

Comments Type

Technical Data

Can be easily mounted

on or in a 4"sq. junction

box, via ½” in nipple

Available for 120, 220, 240, 277

& 347 VAC operation

Summary of content (4 pages)

PAGE 1
Technical Data Effective March 1, 2018 SP15 & SP20 – Heavy Duty Switchpacks Catalog# Prepared by Project Date Comments Type Can be easily mounted on or in a 4"sq. junction box, via ½” in nipple Overview Switchpacks provide 15 VDC operating voltage to all low voltage, 15 VDC occupancy sensors and daylighting controllers. A single switchpack can provide power for up to five sensors. Up to ten switchpacks can be connected to one sensor for control of multiple circuits.
PAGE 2
Technical Data March 2018 Specifications Power Requirements Control Ballast Compatibility NOTE Operating Environment Housing Motor Load Size Mounting Standards 2 Input: (120/277 VAC-SP20-MV), (347 VAC-SP15-347), (220240 VAC-SP20-240), 50/60 Hz operation.
PAGE 3
Technical Data SP15 & SP20 – Heavy Duty Switchpacks March 2018 Wiring Diagrams A/B Switching Three Way Switching HOT HOT LINE 3. SWITCHES CAN BE USED TO TURN LOADS ON OR OFF. RECOMMENDED WIRE: 18-3 AWG STRANDED WIRE SHIELDED OR NON/SHIELDED RED (15 VDC) SWITCHPACK BLUE (CONTROL) LOAD "B" 2. LOAD TURNS OFF, WHEN SENSOR TIMES OUT. **USE BLACK LEAD FOR 120 VAC. USE ORANGE LEAD FOR 277 VAC. CAP UNUSED LEAD. 3. SWITCHES CAN BE USED TO TURN LOADS ON OR OFF.
PAGE 4
Technical Data SP15 & SP20 – Heavy Duty Switchpacks March 2018 Ordering Catalog # Ratings (LED) Ballast Tungsten Motor (HP) Output SP20-MV SP15-347 120/277 VAC, 50/60 Hz 347 VAC, 50/60 Hz 20A 15A 15A, 120V NR 1HP-120V, 2HP-250V NR 15 VDC, 125mA 15 VDC, 125mA SP20-240 220-240 VAC, 50/60 Hz 20A NR NR 15 VDC, 125mA Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.