Specification Sheet

2
Technical Data
October 2014
PPS-5 – Outdoor Contact Input Photosensor
www.coopercontrol.com
Specifications
Operating
Environment
Temperature: -40°F to 158°F (-40°C to 70°C)
Suitable for outdoor use
Input Voltage
24 VDC
Output Signal
Maximum load 10A @ 24 VDC
Wiring
Moisture proof, color coded lead wire Wire length: 6”
Housing
Weatherproof Lexan®
Sensor Size
3.5”H x 1.25”W x 0.25”D
Threaded Stem
Stem adds 2” to overall height Swivel base provides
1/2”, 14 thread end that fits 1/2” knock out.
Description/Operation
This system accessory is used in conjunction with a lighting control
panel to switch circuits ON or OFF based on outdoor light levels. The
Outdoor Contact Input Photosensor connects to the control panel
low voltage switch inputs. The photosensor constantly monitors the
level of sunlight and provides a signal to the lighting control panel
when the light level crosses the switching threshold.
Installation
This system accessory will require mounting and wiring at the site.