Operating Guide

ATTIC CARD
GreenFiber provides outstanding thermal performance, fire-
resistance and sound control. Consisng of up to 85% recycled
content, GreenFiber insulaon is specially treated for flame
resistance.
R-value means resistance to heat flow - the higher the R-value,
the greater the insulang power.
PM-6.3-194 Rev F 03/15
THIS IS GREENFIBER® BLOW-IN CELLULOSE INSULATION
DO NOT ADD WATER TO THIS PRODUCT
Applicaon Coverage Chart 19.05 lbs (8.64Kg)
INS541LD
Minimum Thickness Net Coverage Gross Coverage (based on 2"x
R-Value at 75° (Inches) (no adjustment for framing) 6" framing on 16" centers)
F Mean
Temperature
Recumbrimiento neto
Recubrimiento Bruto (basado en armazón
Expesor minimo (en pulg
adas) (Sin compensacion para el entramado) de 5.08 cm x 15.24 cm en centro de
40.64 cm)
Valor de re
sisncia
Inial Seled Maximum Minimum Bags Minimum Maximum Sq. Minimum Bags
termica (valor R) a
75® F de
installed Thickness Sq. Ft. per per 1,000 Sq. Weight per Sq. Ft. per Bag. per 1,000 Sq. Ft.
temperatura media
thickness Bag Ft. Ft. (lbs/sq. .)
Espesor inicial Espesor Metros Candad minima Peso minimopor Metros cuadrado Candad minima de
instalado assentado cuadrado de bolsas por 1,000
pie cuadrado maximos por bolsa bolsas por 100
máximos por
ples cuadrados (lb/pie2) metros cuadrados
bolsa
R13 4.29 3.86 56.0 17.9 0.340 61.8 16.2
R19 6.19 5.57 36.7 27.2 0.519 40.0 25.0
R22 7.12 6.41 31.1 32.2 0.613 33.5 29.8
R25 8.05 7.25 26.8 37.2 0.710 28.7 34.9
R30 9.57 8.62 21.7 46.1 0.878 22.9 43.6
R38 11.97 10.77 16.4 61.1 1.164 17.1 58.5
R49 15.20 13.68 12.0 83.5 1.591 12.4 80.7
R60 18.37 16.53 9.3 108.1 2.059 9.5 105.0
THE ABOVE COVERAGE CHART IS BASED ON A NOMINAL BAG WEIGHT OF 19.05 LBS. USING THE GREENFIBER MONARCH BLOWING MACHINE.
SETTINGS ARE NOT ADJUSTABLE. THE CHART IS BASED ON SETTLED THICKNESS AND IS FOR ESTIMATING PURPOSES ONLY. DO NOT EXCEED
MAXIMUM SQUARE FEET COVERAGE PER BAG. THE APPLICATOR MUST INSTALL BOTH THE MINIMUM NUMBER OF BAGS PER 1,000 SQUARE
FEET AND THE MINIMUM INSTALLED THICKNESS TO INSURE THE STATED R-VALUE HAS BEEN REACHED. FAILURE TO MEET BOTH THESE
REQUIREMENTS MAY PREVENT THE APPLICATION OF DESIRED R-VALUE. THIS PRODUCT MUST BE INSTALLED DRY. THIS COVERAGE CHART DOES
NOT APPLY TO FLOOR APPLICATIONS. DO NOT ADD WATER TO THIS PRODUCT. JOB CONDITIONS, APPLICATION TECHNIQUES, EQUIPMENT AND
SETTINGS CAN INFLUENCE ACTUAL COVERAGE. MINIMUM NET WEIGHT IS 18.1 LBS.
Dry Dense Pack Sidewall Applicaons (3.5 pcf minimum installed density) DO NOT ADD WATER TO THIS PRODUCT
all Applications(3.5pcf minimum installeddensity) DONOTADDWATERTOTHISPRODUCT
Thermal
Resistance R-
Value
Valor de resisncia
termica (valor R)
Framing
Armazón
Installed
Thickness
Inches
Espesor
instalado
(pulgados)
Minimum
Wt. Per Sq.
Ft.
Peso
minimopor pie
cuad
rado
Maximum Coverage Per Bag
(not adjusted for framing)
Recumbrimiento máximos por bolsa
(Sin compensacion para
el entramado)
Maximum Coverage per Bag
(adjusted for framing)
Recumbrimiento máximos por bolsa (con
compensacion para el entramado)
Square Feet per Bag
16" OC 24" OC
R13 2x4 3.5 1.02 18.7 20.6 19.9
R21 2x6 5.5 1.60 11.9 13.1 12.7
THE ABOVE COVERAGE CHART IS FOR DRY APPLIED APPLICATIONS ONLY AND IS BASED ON THE KRENDL KS200, WITH MATERIAL APPLIED DRY .
FOR MAXIMUM COVERAGE PER BAG (ADJUSTED FOR FRAMING), THE FRAMING FACTOR FOR 16" OC
SPACING IS 9.375%; FOR 24" OC SPACING
THE FRAMING FACTOR IS 6.25%.
CERTIFICATION:
This insulation has been installed in conformance
with the above recommendations, to provide a value
of R-_______ using ______ bags of this insulation
to cover ______ square feet of area.
Builder’s Signature: ____________________________
CompanyName:_______________________________
Date: ____________
Applicator’s Signature:___________________________
Company Name: ______________________________
Date: _____________
FOR MORE INFORMATION
CONTACT:
(p) 800.228.0024 (f) 704.379.0685
[e-mail]
GreenFiber Corporate Office
2500 Distribution Street, Suite
200 Charlotte NC 28203
www.greenfiber.com
MANUFACTURING
LOCATIONS:
Albany, NY
Belchertown, MA
Delphos, OH
Norfolk, NE
Chandler, AZ
Salt Lake City, UT
Tampa, FL
Waco, TX
Wilkes-Barre, PA
MADE IN
THE
USA