Replacement Part List

Spark Plug Maintenance

In order to service the spark plug, you will need a spark plug wrench (commercially available).

Recommended spark plugs: TORCH F6RTC but we recommend our OEM spark

plug.

To ensure proper engine operation, the spark plug must be properly gapped and free of deposits.

1. Remove the spark plug cap.

2. Clean any dirt from around the spark plug base.

3. Use a spark plug wrench to remove the spark plug.

4. Visually inspect the spark plug. Discard it if the insulator is cracked or chipped. Clean the spark

plug with a wire brush

if it is to be reused.

5. Measure the plug gap with a feeler gauge.

(Correct as necessary by carefully bending the side electrode.)

The gap should be : 0.70-0.80 mm (0.028-0.031in)

6. Check that the spark plug washer is in good condition.

7. After the spark plug is seated, tighten with a spark plug in by hand to prevent cross-threading.

8 . After the spark plug is seated, tighten with a spark plug wrench to compress the washer.

Inspection, Cleaning, and Maintenance

WARNING! ALWAYS MAKE SURE THE ENGINE POWER SWITCH IS IN ITS

“OFF” POSITION. DISCONNECT THE SPARK PLUG WIRE FROM THE ENGINE.

AND ALLOW SUFFICIENT TIME FOR THE ENGINE AND GENERATOR TO

COMPLETELY COOL BEFORE PERFORMING ANY INSPECTIONS,

MAINTENANCE, OR CLEANING.

NNOOTTEE:: TTHHEE SSPPAARRKK PPLLUUGG MMUUSSTT BBEE SSEECCUURREELLYY TTIIGGHHTTEENNEEDD.. AANN IIMMPPRROOPPEERRLLYY

TTIIGGHHTTEENNEEDD SSPPAARRKK PPLLUUGG CCAANN BBEECCOOMMEE VVEER

RYY HHOOTT AANNDD CCOOUULLDD DDAAMMAAGGEE TTHHEE

EENNGGIINNEE.. NNEEVVEERR UUSSEE SSPPAARRKK PPLLUUGGSS WWHHIICCHH HHAAVVEE AANN IIMMPPRROOPPEERR HHEEAATT RRAANNGGEE..

UUSSEE OONNLLYY RREECCOOMMMMEENNDDEEDD SSPPAARRKK PPLLUUSS OORR EEQQUUIIVVAALLEENNTT..

Owner’s Manual