SDS
1541551-Lithium-ion Battery Pack GMBA6200-25 62V 135Wh
_
_
Page 7 / 13
Nickel
TWA = 1.5 mg/m
³
(inhalable
particulate matter)
Not available
TWA = 1 mg/m
³
(metal and
insoluble
compounds (as
Ni))
TWA = 1 mg/m
³
(soluble
compounds (as
Ni))
Ca TWA =
0.015 mg/m
3
(metal and
insoluble
compounds (as
Ni))
Ca TWA =
0.015 mg/m
3
(soluble
compounds (as
Ni))
Not applicable
Aluminum
TWA = 1 mg/m
³
(respirable
particulate
matter)
Not available
TWA = 15 mg/m
³
(Aluminum Metal
(as Al) Total
dust)
TWA = 5 mg/m
³
(Aluminum Metal
(as Al)
Respirable
fraction)
TWA = 1 mg/m
³
(Aluminum Metal
(as
Al),Respirable
fraction)
Not applicable
Carbon black
TWA =
3mg/m
³
(inhalable
particulate
matter)
Not available
TWA = 3.5 mg/m
³
TWA = 3.5 mg/m
3
Ca TWA = 0.1
mg PAHs/m
3
[Carbon black in
presence of
polycyclic
aromatic
hydrocarbons
(PAHs)]
Not applicable
Copper
TWA = 0.2 mg/m
³
(fume)
Not available
Not applicable
Not applicable
Not applicable
Other Exposure Guidelines Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d
962 (11th Cir., 1992). See section 15 for national exposure control parameters.
Appropriate engineering controls
Engineering controls Showers
Eyewash stations
Ventilation systems.
Individual protection measures, such as personal protective equipment
Eye/face protection Face protection shield.
Hand protection Wear suitable gloves. Impervious gloves.
Skin and body protection Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron.
Respiratory protection No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
General hygiene considerations Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Wear suitable gloves and eye/face protection. Do not eat, drink or
smoke when using this product. Remove and wash contaminated clothing and gloves,
including the inside, before re-use. Regular cleaning of equipment, work area and clothing
is recommended. Wash hands before breaks and immediately after handling the product.