Use and Care Manual

1.1 WORK AREA SAFETY

Never attach or adjust any attachment while the power head is running or with the

battery installed. Failure to stop the motor and remove the battery may cause

serious personal injury.

Make sure the tool is firmly secured before operation. Failure to secure the attach-

ment and power head/extension pole as instructed above could result in serious

injury or death.

GREEN MACHINE 62V CORDLESS EXTENSION TUBE ATTACHMENT GREEN MACHINE 62V CORDLESS EXTENSION TUBE ATTACHMENT

GENERAL SAFETY RULES

Page 2-English

Page 3-English

PLEASE READ ALL INSTRUCTIONS BEFORE OPERATING YOUR MACHINE. The

safety instructions in this manual are designed to protect your safety and guide your use

of the Green Machine

Cordless power head. Failure to read and understand the

following information may create an unsafe workspace which could constitute a risk of

electric shock, explosions, heavy flying objects, fire, or chemical reactions.

NOTE: This extension tube is designed for use with GREEN MACHINE Power Head

GMMT6200-PH and GREEN MACHINE Pole Saw Attachment GMMT6200-PSA or GREEN

MACHINE Hedge Trimmer Attachment GMMT6200-HTA.

For detailed safety caution and operation of the extension tube, refer to pole

saw or hedge trimmer operator’s manual.

Prepare your workspace before turning on your tool. Ensuring a clean and well-lit

workspace should always be the first step in using your Green Machine

power head

since cluttered or dark areas invite accidents.

Clear the area before each use. Remove all objects such as rocks, broken glass,

nails, wire, or string.

Never operate your power tool in the presence of flammable liquids, gases, or dust.

Power tools create sparks that may ignite dust or fumes.

Keep children and bystanders away while operating your power tool. By operating

away from bystanders, you are reducing the risk of injury by minimizing potential harm

to people other than yourself. Additionally, you can avoid unwanted distractions which

may lead to unsafe operations.

Never use the power head within close vicinity of any electric cables.

Avoid dangerous environments, and don’t use tools in wet locations.

Use the tool as it was designed. Do not use the tool for any job except for which it is

intended.

Don’t use the tool in the rain.

■