Certifications 2

MATERIAL SAFETY DATA SHEET (MSDS)
Lead acid battery
Date of preparation: 09.07.2020
Version: 1.0/ENG
Revision date: -
6
6.4. Reference to other sections
See Section 7 of the Material Safety Data Sheet for handling and handling the mixture storage.
Refer to Section 8 of the SDS on exposure controls and protection individual. See Section 13 of
the Safety Data Sheet for waste disposal.
7. Handling and storage
7.1. Precautions for safe handling
Do not allow the battery contacts to short-circuit.
Protect against mechanical damage.
Do not open or disassemble the product.
Follow the recommendations.
Do not clean the battery with dry materials.
Use wet materials.
7.2. Conditions for safe storage, including any incompatibilities
Store in a cool and sheltered place.
Do not store charged lead-acid batteries below -50 ° C.
It is recommended to store the batteries at room temperature.
If a large number of batteries are stored, notify the relevant security authorities environment.
Store the batteries according to the instruction manual.
7.3. Specific end use(s)
Battery
8. Exposure controls/personal protection
8.1. Control parameters
Lead OES / LTEL - ppm 0.15 mg/m3
Lead Dioxide OES / LTEL - pmm 0.15 mg/m3
8.2. Exposure controls
Wear safety shoes with toe protector.
Where internal components are liberated use rubber or neoprene boots.
Wear goggles/safety glasses giving complete eye protection.
excessive air contamination exists.
Wear PVC mitts, gloves or gauntlets.