GM-2002-2PK Garda Reclining Chair
EN ES SAFETY INSTRUCTIONS AND WARNINGS: • The product is to be used exclusively for its intended purpose. • Regularly check the condition and functionality of the product. If you notice any damage, the product should no longer be used. • Only use the product on solid and level ground. • Make sure the product is positioned securely. • WARNING! Risk of clamping/crushing fingers during assembly and disassembly of the product.
PARTS A A2 A1 1 pc 1 pc A3 1 pc A4 A5 1 pc 1 pc 1 pc A6 1 pc 1 pc HARDWARE 1 2 8 pcs M6 x 40 4 3 4 pcs 2 pcs 12 pcs M6 x 30 M6 2-5 M8 x 45
HARDWARE 5 6 8 7 4 pcs 2 pcs M8 1 pc 1 pc M8 ASSEMBLY INSTRUCTIONS 1 1 3 x2 x2 2 1 3 x1 x1 Align Front Panel (A2) with Arm (A). Secure washer (3) and bolt (2) with supplied Allen key (7). Align Arm (A) with Seat (A1). Secure washer (3) and bolt (1) with supplied Allen key (7). 3 2 3 x2 x2 4 Align with Seat (A1). Secure washer (3) and bolt (1) with supplied Allen key (7). 1 3 x2 x2 Align Back Panel (A3) with Seat (A1). Secure washer (3) and bolt (1) with supplied Allen key (7).
ASSEMBLY INSTRUCTIONS 5 6 Align Arm (A5) with the attached pin of Back Frame (A4). Place arm side down. Align Back Frame (A4) with attached pin. 7 8 Secure Front Panel (A2) using washer (3) and bolt (1) with supplied Allen key (7). Place Arm (A5) side down. Secure Seat (A1) using washer (3) and bolt (1) with supplied Allen key (7).
ASSEMBLY INSTRUCTIONS 9 10 Align Gas Lift in center of Seat (A1). Secure front end using washer (5) and bolt (4). Tighten hex nut (6) on end with supplied wrench (8). Secure back end using washer (5) and bolt (4). Tighten hex nut (6) on end with supplied wrench (8). 11 12 Place Cushion (A6) on top. Use attached seat strings to secure. To recline, pull side lever.
