Instruction Manual
Section 1
Section 1
Getting Started 1312 Getting Started
Using The Battery
TheJitterbugRechargeableBatteryisdesignedtodeliveranefcientchargeto
your Jitterbug for up to 25 days of standby time or 5 hours of talk time.
Installing And Removing The Battery
To Install The Battery The First Time:
1. With the Samsung logo facing up, slide the battery into the back of your
Jitterbug so the gold contacts on the side of thebattery connect with the gold
pins inside the phone.
2. Push the battery into place.
To Install The Battery Cover:
1. Place the cover over the back of the phone so
the hinges align with the slots near the top
of the phone.
2. Push on the cover while sliding it up towards
the top of the phone, inserting the hinges into the slots.
3. Press down on the cover around all sides ensuring the cover snaps into
place.
To Remove The Battery:
1. If the phone is on, turn it off by opening your Jitterbug and holding down the
on
off
button until the GreatCall logo appears. The phone will then turn off.