Quick Start Guide

Quick-Start Guide
7 Quick-Start Guide
Quick-Start Guide
Quick-Start Guide 8
2. Detail Area – the middle of the Inside Display provides the details of each feature.
3. Action Line –line where questions or commands are displayed. You can respond by
pressing the
or buttons.
4. Additional Entries Exist– the small arrows indicate when entries are available before
or after the current screen. Use the “Up/Down”
button to scroll through entries.
Turning Your Jitterbug On
1. Open your Jitterbug.
2. Press the
button in the upper right corner of the keypad until your Jitterbug
turns on and the Jitterbug logo appears on the Inside Display.
3. When you hear a dial tone, your Jitterbug has service and is ready to use. If a
connection is not possible, a “No Service” message will appear on the Outside
Display and a dial tone will not be heard.
How To Read The Inside Display
The screen on the inside of your Jitterbug
®
is referred to as the Inside Display. The
following diagram explains the areas of the Inside Display.
1. Feature Area – identies the feature you are using. For example, when you are in the
Phone Book, you will see “PHONE BOOK” in the Feature Area.
1. Feature Area
2. Detail Area
3. Action Line
4. Additional
Entries Exist
1008309_GC_QSG_R1 indd 7-8 10/13/10 12 03 PM