Instruction Manual

Section9

Bluetooth 115114 Bluetooth

Using Your Jitterbug With The Samsung WEP 470 Premium

Bluetooth Headset

TherearethreestepstosetupyourJitterbugwiththeSamsungWEP470Premium

Bluetooth headset:

1. Turning the Bluetooth feature on your Jitterbug On and Off.

2.SettingyourSamsungWEP470PremiumBluetooth headset to Pairing Mode.

3.SettingyourJitterbugtoPairing Mode.

Turning The Bluetooth Feature On Your Jitterbug On And Off

Turning The Bluetooth Feature On:

The following procedure is applicable to all Bluetooth compatible devices. You must have

yourJitterbugsetto“Bluetooth ON” to use any Bluetooth device.

1.StartingfromtheMain Screen of your Jitterbug, scroll through the options using the

“Up/Down”

button until “Settings” is highlighted in gray in the middle of the Inside Display.

2. Press the

button on your Jitterbug to select the “Settings.”

3.Scrollthroughthe“Settings” options using the “Up/Down”

button until “Bluetooth” is

highlighted in gray in the middle of the Inside Display.

4. Press the

button to select the “Bluetooth” option.

5.Scrollthroughthe“Bluetooth” options using the “Up/Down”

button until “Bluetooth OFF”

is highlighted in gray in the middle of the Inside Display.

6. Press the

button to turn “Bluetooth ON.” You will now see the words “Bluetooth ON”

highlighted in gray in the middle of the Inside Display.

7. WhenyourJitterbugissetwith“Bluetooth ON,” you will see the Bluetooth symbol in

the top right corner of the Main Screen.

1008301_GreatCall_jB_HowToGuide_R11.indd 114-115 3/9/2011 10:23:38 AM