Instruction Manual

Section8

JitterbugSimpleText105104JitterbugSimpleText

5. Press the

button to select “Library,” and choose a pre-written text message.

Or, to create your own message, scroll until “Customize” is highlighted, and press

the

button.

6. Press the

button when you are done selecting or typing your message. You will

automatically go to your Phone Book. Use the “Up/Down”

button to scroll through

your contacts. Press the

button when the contact to whom you wish to send the

 TextMessageisinthemiddleofyourInsideDisplay.

If you do not have the contact in your Phone Book, use the “Up/Down” button

to scroll to the “ENTER NUMBER” option. Press the

button and enter the phone

number using the keypad. Once you have entered the number, simply press

the

button to send your message.

7. After you press the

button, you will see the words “Sending Message” on the

Inside Display.

8.Whenthemessagehasbeensent,youwillseethewords“Message Successfully Sent” on

the Inside Display.

1008301_GreatCall_jB_HowToGuide_R11.indd 104-105 3/9/2011 10:23:36 AM