Instruction Manual

Section2

Placing And Receiving Calls 4746 Placing And Receiving Calls

Adjusting The Earpiece Speaker Volume

Whenyou’reonacall,pressthevolume button up or down until the sound reaches a

comfortable level.

Your Jitterbug has three volume options for your earpiece speaker that you can adjust

while on a call asshownbelow:

  •High

  •Medium

  •Low

Call Waiting

CallWaitingisafeaturethatallowsyoutoacceptasecondcallifyouarealreadyona

call with another person. The phone does not come with this helpful feature enabled,

but if you would like to turn it on, simply call us at 1-800-733-6632.ACallWaitingsignal

alerts you that there is a second caller waiting. The following steps outline how to use

CallWaitingonyourJitterbug:

1.WhenasecondpersoncallsyourJitterbugwhileyouarealreadyonacallwithsomeone

else, you will hear an audible beep and a message will appear on the Inside Display to

notify you of a second incoming call.

2. To answer the second incoming call, press the

button. You will switch to the

secondcallerandtherstcallerwillbeputonholdandwillremainontheotherline.

3. To switch between the two callers, press the

button. The Inside Display will

indicate the name and number of the person you are connected with.

4. To end a call at anytime, simply press the

button.

1008301_GreatCall_jB_HowToGuide_R11.indd 46-47 3/9/2011 10:23:24 AM