TDS

PRODUCT DESCRIPTION
GREAT STUFF™ Painters Latex Siliconized Acrylic Caulk is one
part acrylic sealant that forms a permanent water repellent layer
after curing. It is paintable and resistant to weather conditions.
It retains its flexibility for an extended period of time after curing.
It is also water, wind and moisture resistant on aluminum, wood
and PVC frames and windows.
PROPERTIES
• Easy to use - water clean up
• Paintable
• Non-sag
• UV resistant
• Bonds to most common materials
• Form permanently water repellent layer after curing
• Remains flexible for a long time after curing
• Does not stain or damage the bonding surface
• Water, wind and moisture resistant on aluminum, wood
and PVC frames and windows.
• Lifetime product warranty
TECHNICAL INFORMATION
Chemical Base: Acrylic
Specific gravity: 1.55 ± 0.03 g/cm³
Tack free time
(77ºF/25ºC and 50% R.H): 15 - 45 Minutes
Cure Rate
(77ºF/25ºC and 50% R.H): 0.08 inch/24 hour
Tensile Strength at Break: ≥ 0.1 Mpa
Elongation at Break: ≥ 200%
Modulus 100 % elongation: > 0.2 Mpa
APPLICATION DETAILS
Application Temperature: 41°F to 95°F (5°C to 35°C)
Temperature Resistance: 14°F to 176°F (-10°C to 80°C)
- For best results, the surface must be clean, dry and free of dust, oil and grease, to ensure
a clean and strong adherence between the sealant and the surface.
- Cut off the cartridge tip, screw on the removable nozzle and cut tip to your desired bead size.
- Insert cartridge into caulking dispenser.
- Hold at a 45° angle and apply ahead of nozzle to achieve a smooth seal.
- Sealant normally dries to touch in 45 minutes and cures. & bonds on average 24 hours.
- Uncured product can be cleaned with water.
- Once cured, the product can be removed mechanically.
Do not use on oil leaking materials such as bituminous substrates, natural and synthetic
rubber. Do not use in applications where continous water immersion is possible.
GREAT STUFF™ Painters Latex is paintable when fully dry. However we recommend
testing compatibility with paint before application. It can be cleaned from all tools and
application equipment with water before curing. Cured material can only be removed
mechanically.
PACKAGING
Cartridge
COLOR
White
STORAGE
• Store the product in a cool and dry place.
• The shelf life is 24 months at temperatures between 41°F and 77°F (5°C and 25°C).
• Do not store in extreme cold, direct sunlight, and temperatures above 122°F/50ºC.
CAUTION
Avoid contact with eyes and skin. Do not breathe vapors. Do not take internally. In case of eye
contact, flush thoroughly with water. In case of skin contact, flush thoroughly with water. If
breathed in, move person into fresh air. If swallowed, do not induce vomiting. Call a physician
immediately.
HEALTH AND SAFETY
For more information, please refer to the most recent Safety Data Sheet found at
www.greatstuff.com.
DISTRIBUTED BY
GREAT STUFF™ is a trademark or registered trademark of affiliates of
DuPont de Nemours, Inc. used under license by National Adhesive Inc.
For more Information scan the QR Code
www.greatstuff.com
NATIONAL ADHESIVE INC.
8280 WILLOW OAKS CORPORATE DRIVE, SUITE 600, FAIRFAX, VA 22031, U.S.A
[phone] I greatstu@nationaladhesive.com I www.nationaladhesive.com
TECHNICAL DATA SHEET
PAINTERS LATEX