Technical Specifications

Product Name: GREAT STUFF PRO(TM) Wall and Floor 26.5oz
HC PU Foam Adhesive
Issue Date: 01/27/2010
Page
5
of
12
Personal Protection
Eye/Face Protection: Use safety glasses (with side shields).
Skin Protection: Use protective clothing chemically resistant to this material. Selection of specific
items such as face shield, boots, apron, or full body suit will depend on the task. Remove
contaminated clothing immediately, wash skin area with soap and water, and launder clothing before
reuse or dispose of properly. Items which cannot be decontaminated, such as shoes, belts and
watchbands, should be removed and disposed of properly.
Hand protection: Use gloves chemically resistant to this material. Examples of preferred
glove barrier materials include: Butyl rubber. Chlorinated polyethylene. Polyethylene. Ethyl
vinyl alcohol laminate ("EVAL"). Examples of acceptable glove barrier materials include:
Neoprene. Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyvinyl chloride ("PVC" or "vinyl").
Viton. NOTICE: The selection of a specific glove for a particular application and duration of
use in a workplace should also take into account all relevant workplace factors such as, but
not limited to: Other chemicals which may be handled, physical requirements (cut/puncture
protection, dexterity, thermal protection), potential body reactions to glove materials, as well as
the instructions/specifications provided by the glove supplier.
Respiratory Protection: Atmospheric levels should be maintained below the exposure guideline.
When atmospheric levels may exceed the exposure guideline, use an approved air-purifying respirator
equipped with an organic vapor sorbent and a particle filter. For situations where the atmospheric
levels may exceed the level for which an air-purifying respirator is effective, use a positive-pressure
air-supplying respirator (air line or self-contained breathing apparatus). For emergency response or
for situations where the atmospheric level is unknown, use an approved positive-pressure self-
contained breathing apparatus or positive-pressure air line with auxiliary self-contained air supply. The
following should be effective types of air-purifying respirators: Organic vapor cartridge with a
particulate pre-filter.
Ingestion: Avoid ingestion of even very small amounts; do not consume or store food or tobacco in
the work area; wash hands and face before smoking or eating.
Engineering Controls
Ventilation: Use only with adequate ventilation. Local exhaust ventilation may be necessary for some
operations. Provide general and/or local exhaust ventilation to control airborne levels below the
exposure guidelines. Exhaust systems should be designed to move the air away from the source of
vapor/aerosol generation and people working at this point. The odor and irritancy of this material are
inadequate to warn of excessive exposure.
9. Physical and Chemical Properties
Physical State
Foam
Color
Natural
Odor
Mild
Odor Threshold
No test data available
Flash Point - Closed Cup -104 °C (-155 °F) Estimated. Flammable gas.
Flammability (solid, gas)
Flammable gas.
Flammable Limits In Air Lower: No test data available
Upper: No test data available
Autoignition Temperature
No test data available
Vapor Pressure 1,151 kPa @ 55 °C Supplier Container is under pressure.
Boiling Point (760 mmHg)
Not applicable.
Vapor Density (air = 1)
No test data available
Specific Gravity (H2O = 1) 1.06 Calculated
Freezing Point
No test data available
Melting Point
No test data available
Solubility in water (by
weight)
Insoluble
pH
Not applicable
Decomposition
Temperature
No test data available