Technical Specifications

Product Name: GREAT STUFF PRO(TM) Wall and Floor 26.5oz
HC PU Foam Adhesive
Issue Date: 01/27/2010
Page
3
of
12
Wash clothing before reuse. An MDI skin decontamination study demonstrated that cleaning very
soon after exposure is important, and that a polyglycol-based skin cleanser or corn oil may be more
effective than soap and water. Discard items which cannot be decontaminated, including leather
articles such as shoes, belts and watchbands.
Inhalation: Move person to fresh air. If not breathing, give artificial respiration; if by mouth to mouth
use rescuer protection (pocket mask, etc). If breathing is difficult, oxygen should be administered by
qualified personnel. Call a physician or transport to a medical facility.
Ingestion: If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by
medical personnel.
Notes to Physician: Maintain adequate ventilation and oxygenation of the patient. May cause
respiratory sensitization or asthma-like symptoms. Bronchodilators, expectorants and antitussives
may be of help. Treat bronchospasm with inhaled beta2 agonist and oral or parenteral corticosteroids.
Respiratory symptoms, including pulmonary edema, may be delayed. Persons receiving significant
exposure should be observed 24-48 hours for signs of respiratory distress. If you are sensitized to
diisocyanates, consult your physician regarding working with other respiratory irritants or sensitizers.
Exposure may increase "myocardial irritability". Do not administer sympathomimetic drugs such as
epinephrine unless absolutely necessary. Treatment of exposure should be directed at the control of
symptoms and the clinical condition of the patient.
Medical Conditions Aggravated by Exposure: Excessive exposure may aggravate preexisting
asthma and other respiratory disorders (e.g. emphysema, bronchitis, reactive airways dysfunction
syndrome).
Emergency Personnel Protection: First Aid responders should pay attention to self-protection and
use the recommended protective clothing (chemical resistant gloves, splash protection). If potential for
exposure exists refer to Section 8 for specific personal protective equipment.
5. Fire Fighting Measures
Extinguishing Media: Water fog or fine spray. Dry chemical fire extinguishers. Carbon dioxide fire
extinguishers. Foam. Do not use direct water stream. Straight or direct water streams may not be
effective to extinguish fire. Alcohol resistant foams (ATC type) are preferred. General purpose
synthetic foams (including AFFF) or protein foams may function, but will be less effective.
Fire Fighting Procedures: Keep people away. Isolate fire and deny unnecessary entry. Stay
upwind. Keep out of low areas where gases (fumes) can accumulate. Water may not be effective in
extinguishing fire. Do not use direct water stream. May spread fire. Fight fire from protected location
or safe distance. Consider the use of unmanned hose holders or monitor nozzles. Eliminate ignition
sources. Move container from fire area if this is possible without hazard. Use water spray to cool fire-
exposed containers and fire-affected zone until fire is out.
Special Protective Equipment for Firefighters: Wear positive-pressure self-contained breathing
apparatus (SCBA) and protective fire fighting clothing (includes fire fighting helmet, coat, trousers,
boots, and gloves). Avoid contact with this material during fire fighting operations. If contact is likely,
change to full chemical resistant fire fighting clothing with self-contained breathing apparatus. If this is
not available, wear full chemical resistant clothing with self-contained breathing apparatus and fight fire
from a remote location. For protective equipment in post-fire or non-fire clean-up situations, refer to
the relevant sections.
Unusual Fire and Explosion Hazards: Contains flammable propellant. Aerosol cans exposed to fire
can rupture and become flaming projectiles. Propellant release may result in a fireball. Vapors are
heavier than air and may travel a long distance and accumulate in low lying areas. Ignition and/or flash
back may occur. Dense smoke is produced when product burns.
Hazardous Combustion Products: During a fire, smoke may contain the original material in addition
to combustion products of varying composition which may be toxic and/or irritating. Combustion
products may include and are not limited to: Nitrogen oxides. Isocyanates. Carbon monoxide.
Carbon dioxide. Hydrogen cyanide.
6. Accidental Release Measures
Steps to be Taken if Material is Released or Spilled: Contain spilled material if possible. Ground
and bond all containers and handling equipment. Isolate area until gas has dispersed. Use non-