User Manual

ManualsBrandsGreat Plains ManualsHardwareUniversal Acre Meter

01/21/2014 589-414M

Great Plains Manufacturing, Inc. 1

Universal Acre Meter

Installation Instructions

General Information

These Instructions explain how to install the 589-415A

Acre Meter Kit Wheel or the 589-427A Gang Mount Acre

Meter Kit. The acre meter program chart applies to the

meter being mounted on wheel or turbo blade.

Tools Required

• Basic Hand Tools

• Lug Wrench or Air Impact

• Torque Wrench

Models Covered

Turbo-Till Disk Harrow

Turbo-Chopper Plains Plow

Turbo Max Field Cultivator

Turbo Chisel

Discovator

Discovator DVN

Figure 1

Electronic Acremeter

27378

589-415A Acre Meter Kit Wheel

589-427A Gang Mount Acre Meter Kit

Part Number

Description Qty.

586-593D

8 - BOLT HUBOMETER

MOUNT

586-594D

6 - BOLT HUBOMETER

MOUNT

891-420C

ELECTRONIC ACRE/HECT-

ARE METER

Part Number

Description Qty.

589-151D PART ACRE METER 1

589-428H ACRE METER SUB ASSY 1

802-183C RHSNB 1/2-13X1 GR5 2

803-342C

NUT HEX TOP LOCK 1/2-

13PLT

891-420C

ELECTRONIC ACRE/HECT-

ARE METER

Summary of content (12 pages)

PAGE 1
Great Plains Manufacturing, Inc. Universal Acre Meter Installation Instructions General Information These Instructions explain how to install the 589-415A Acre Meter Kit Wheel or the 589-427A Gang Mount Acre Meter Kit. The acre meter program chart applies to the meter being mounted on wheel or turbo blade.
PAGE 2
Acre Meter Great Plains Manufacturing, Inc. Refer to Figure 2 Note: The wheel mount will bolt on the same for either a 6 or 8 bolt wheel but will use either the 596-594D for 6-bolt and the 596-593D for 8-bolt. Mount acre meter on either outside wing wheel. 1. Bolt the 891-420C acre meter 1 to the appropriate 596-593D or 596-594D hubometer mount 2 with the 1/2 lock nut 3 provided with acre meter. 2. Tighten top lock nut to secure to bracket. 3.
PAGE 3
Great Plains Manufacturing, Inc. Electronic Hubodometer To program the electronic hubodometer use the magnetic programming tool included with the meter. A typical permanent magnet will also work. The tool is used to initialize and configure the hubodometer bu touching it to sensor locations on the face of the meter. The hubometer is versatile enough to work with any tire size as well as to be adjusted for applications with the unit of measure in miles, kilometers, acres and hectares.
PAGE 4
Acre Meter mode, the unit will never enter the program mode again. If an error was made, the unit will need to be replaced. The serial # and the background total however are still viewable by holding the magnet on the left target as described above. • If the security feature is left off, tapping the left target once more will make the display show PROG. • PROG will be display for about 10 seconds.
PAGE 5
Great Plains Manufacturing, Inc. Acre Meter Conversion Chart WORKING WIDTH MODEL #'S TIRE SIZE 6.70 X 15 9.5L X 15 11L X 15 12.5L X 15 10 - 16.5 33 X 15.5 -16.5 12.5L X 16.5 GALAXY 32 -15.5 X 16.5 GALAXY 380/55R16.5 440/55R18 20" Turbo Blade 22"Turbo Blade WORKING WIDTH MODEL #'S TIRE SIZE 6.70 X 15 9.5L X 15 11L X 15 12.5L X 15 10 - 16.5 33 X 15.5 -16.5 12.5L X 16.5 GALAXY 32 -15.5 X 16.5 GALAXY 380/55R16.5 440/55R18 20" Turbo Blade 22"Turbo Blade WORKING WIDTH MODEL #'S TIRE SIZE 6.70 X 15 9.
PAGE 6
Great Plains Manufacturing, Inc. 6 Acre Meter Great Plains Manufacturing, Inc. Corporate Office P.O.
PAGE 7
1 Great Plains Manufacturing, Inc. Universal Acre Meter Installation Instructions General Information These Instructions explain how to install the 589-415A Acre Meter Kit Wheel or the 589-427A Gang Mount Acre Meter Kit. The acre meter program chart applies to the meter being mounted on wheel or turbo blade.
PAGE 8
2 Acre Meter Great Plains Manufacturing, Inc. Refer to Figure 2 Note: The wheel mount will bolt on the same for either a 6 or 8 bolt wheel but will use either the 596-594D for 6-bolt and the 596-593D for 8-bolt. Mount acre meter on either outside wing wheel. 1. Bolt the 891-420C acre meter 1 to the appropriate 596-593D or 596-594D hubometer mount 2 with the 1/2 lock nut 3 provided with acre meter. 2. Tighten top lock nut to secure to bracket. 3.
PAGE 9
3 Great Plains Manufacturing, Inc. Electronic Hubodometer To program the electronic hubodometer use the magnetic programming tool included with the meter. A typical permanent magnet will also work. The tool is used to initialize and configure the hubodometer bu touching it to sensor locations on the face of the meter. The hubometer is versatile enough to work with any tire size as well as to be adjusted for applications with the unit of measure in miles, kilometers, acres and hectares.
PAGE 10
4 Acre Meter mode, the unit will never enter the program mode again. If an error was made, the unit will need to be replaced. The serial # and the background total however are still viewable by holding the magnet on the left target as described above. • If the security feature is left off, tapping the left target once more will make the display show PROG. • PROG will be display for about 10 seconds.
PAGE 11
5 Great Plains Manufacturing, Inc. Acre Meter Conversion Chart WORKING WIDTH MODEL #'S TIRE SIZE 6.70 X 15 9.5L X 15 11L X 15 12.5L X 15 10 - 16.5 33 X 15.5 -16.5 12.5L X 16.5 GALAXY 32 -15.5 X 16.5 GALAXY 380/55R16.5 440/55R18 20" Turbo Blade 22"Turbo Blade WORKING WIDTH MODEL #'S TIRE SIZE 6.70 X 15 9.5L X 15 11L X 15 12.5L X 15 10 - 16.5 33 X 15.5 -16.5 12.5L X 16.5 GALAXY 32 -15.5 X 16.5 GALAXY 380/55R16.5 440/55R18 20" Turbo Blade 22"Turbo Blade WORKING WIDTH MODEL #'S TIRE SIZE 6.70 X 15 9.
PAGE 12
Great Plains Manufacturing, Inc. 6 Acre Meter Great Plains Manufacturing, Inc. Corporate Office P.O.