Operator Manual User guide

38 1300 and 1300F Table of Contents Index Great Plains Manufacturing, Inc.
175-157M Table of Contents Index 2014-04-15
Opener Depth (Press Wheel Height)
Refer to Figure 39
Set opener seeding depth by adjusting press-wheel
height .
To adjust, first raise openers slightly, then lift and slide T
handles on top of openers Adjust all press wheels to
the same height.
• For more shallow seeding, slide T handles forward
toward implement.
• For deeper seeding, slide T handles backward
away from implement.
If press wheels are lifting off ground, increase down
pressure at the opener frame (page 32).
If press wheels are digging into ground, reduce down
pressure at the opener frame.
Figure 39
Adjusting Opener Depth
15659
1
2
B
F
1
2
F
B