Parts Manual Owner manual

RevisionCommentsPart DescriptionPart No.Ref.
Image No.dwg13529
2nd rev.JAW CLUTCH CW EXTENDED176-040S1.
Use existing stock; 1st rev.RPBY 176-040S176-038S1.
2nd rev.SNAP RING EXT 1 1/4 HEAVY800-177C1.
Use existing stock; 1st rev.SNAP RING EXT INVERTED 1-1/4800-077C1.
CLUTCH FRICTION WASHER176-065D2.
BSHG FLG 1.26IDX1.41ODX.87L817-111C3.
2nd rev.CLUTCH DRIVE PLATE LONG - CW176-078D4.
Use existing stock; 1st rev.RPBY 176-078D176-061D4.
2nd rev.CLUTCJ ARM PLATE176-080D5.
Use existing stock; 1st rev.RPBY 176-080D176-063D5.
2nd rev.CLUTCH SLIDE PLATE - CW176-076D6.
Use existing stock; 1st rev.RPBY 176-076D176-059D6.
2nd rev.CLUTCH HUB 1 BORE176-083D7.
Use existing stock; 1st rev.RPBY 176-083D176-073D7.
SPRING COMP 2 1/16 OD X 4 LG807-097C8.
CLUTCH SPRING RETAINER176-066D9.
2nd rev.PIN ROLL 3/16X 1 1/2 PLT805-024C10.
Use existing stock; 1st rev.RPBY 805-024C805-172C10.
11/13/12 - 67 - 150-131P
Table of Contents Part Number Index
Drive
Jaw Clutch
(Applies to 1205NT only)