Operator Manual Manual

706/1006 Seed Box Agitator 118-903M 9/13/04
4
Great Plains Mfg., Inc.
Section 2 Assembly Instructions & Set-Up
Section 2 Assembly Instructions & Set-Up
Torque Values Chart for UNC Threads
Bolt head
identification
marks are as per
grade.
NOTE: Manufactur-
ing marks will vary.
Grade 2 Grade 5 Grade 8*
Bolt Size
Foot Pounds Newton-Meters Foot Pounds Newton-Meters Foot Pounds Newton-Meters
inches mm Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max.
1/4" 6.35
5 6 6.8 8.13 9 11 12.2 14.9 12 15 16.3 20.3
5/16" 7.94
10 12 13.6 16.3 17 20.5 23.1 27.8 24 29 32.5 39.3
3/8" 9.53
20 23 27.1 31.2 35 42 47.5 57.0 45 54 61.0 73.2
7/16" 11.11
30 35 40.7 47.4 54 64 73.2 86.8 70 84 94.9 113.9
1/2" 12.70
45 52 61.0 70.5 80 96 108.5 130.2 110 132 149.2 179.0
9/16" 14.29
65 75 88.1 101.6 110 132 149.2 179.0 160 192 217.0 260.4
5/8" 15.88
95 105 128.7 142.3 150 180 203.4 244.1 220 254 298.3 358.0
3/4" 19.05
150 185 203.3 250.7 270 324 366.1 439.3 380 456 515.3 618.3
7/8" 22.23
160 200 216.8 271.0 400 480 542.4 650.9 600 720 813.6 976.3
1" 25.40
250 300 338.8 406.5 580 596 786.5 943.8 900 1080 1220.4 1464.5
1 1/8" 25.58
800 880 1084.8 1193.3 1280 1440 1735.7 1952.6
1 1/4" 31.75
1120 1240 1518.7 1681.4 1820 2000 2467.9 2712.0
1 3/8" 34.93
1460 1680 1979.8 2278.1 2380 2720 3227.3 3688.3
1 1/2" 38.10
1940 2200 2630.6 2983.2 3160 3560 4285.0 4827.4
NOTE: Torque requirements listed above do not apply to self-locking nuts. For self-locking nuts increase the torque requirements listed by 15%.
Section 1 Safety Rules