Assembly Instructions Owner manual

06/02/2008 123-535M
Great Plains Manufacturing, Inc. Introduction 3
Introduction
Description of Unit
These kits add small seeds planting capability to many
Great Plains 7-foot and 10-foot end-wheel drills.
These kits also replace an older kit (before July 1991),
and may be used to upgrade drills with the previous
small seeds components. The kit drive is independent of
main seed rate, and unaffected by changes to main seed
box Drive Type.
Compatible Drills
Before ordering or installing a kit, check the serial num-
ber plate on the drill against both of the following tables.
The drill product number prefix must be one in the first
table (at right). The specific kit required (from the second
table) depends on drill width, row spacing, and whether
fertilizer or Native Grass is also installed.
Available Kits
Each kit updates one drill.
Width Compatible Drill Models
7-Foot
EWNF7-, EWNG7-, EWNT7-
705NF-, 705NG-, 705NT-
10-Foot
EWNF10-, EWNG10-, EWNT10-
1005NF-, 1005NG-, 1005NT-
Kit Part Existing Seed Boxes Row Spacing Row Count
7-Foot Drills
123-499A Main seed box only 7in (17.8cm) 11
123-500A Main seed box only 7.5in (19.1cm) 10
123-500A Main seed box only 8in (20.3cm) 10
123-501A Main seed box only 10in (25.4cm) 8
123-517A Main, plus Fertilizer or Native Grass 7in (17.8cm) 11
123-518A Main, plus Fertilizer or Native Grass 7.5in (19.1cm) 10
123-518A Main, plus Fertilizer or Native Grass 8in (20.3cm) 10
123-519A Main, plus Fertilizer or Native Grass 10in (25.4cm) 8
10-Foot Drills
123-495A Main seed box only 7in (17.8cm) 16
123-496A Main seed box only 7.5in (19.1cm) 15
123-497A Main seed box only 8in (20.3cm) 14
123-498A Main seed box only 10in (25.4cm) 11
123-520A Main, plus Fertilizer or Native Grass 7in (17.8cm) 16
123-521A Main, plus Fertilizer or Native Grass 7.5in (19.1cm) 15
123-522A Main, plus Fertilizer or Native Grass 8in (20.3cm) 14
123-523A Main, plus Fertilizer or Native Grass 10in (25.4cm) 11
Figure 1
Serial Number Plate Locations
13844
U
D
F
B
L
R