Polar Cube TM Portable Ice Maker OPERATING MANUAL Copyright 2010 DTX International
IMPORTANT - All persons that will operate this equipment must read and become thoroughly competent with all operating procedures and safety precautions. Misuse of this equipment may result in death, personal injury, property damage, fire or electric shock. GENERAL SAFETY PRECAUTIONS 1. You will need this manual for the safety warnings and precautions, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual.
P O L A R C U B E P O R TA B L E I C E M A K E R Select From Multiple Ice Cube Sizes Easy to Use Control Panel with Touch Display Settings Convenient Viewing Window Easy to Setup and Operate 110V/60Hz Makes Ice in 6-12 Minutes SPECIFICATIONS Weight: 46.3 lbs. Input Power: 200W Dimensions: 17”H x 17”L x 15”W Refrigerant: R134a/130g Power: 115V/60Hz Protection Type: 1 Current: 1.
OPERATION MANUAL IMPORTANT - All persons that will operate this equipment must read and become thoroughly competent with all operating procedures and safety precautions. Misuse of this equipment may result in death, personal injury, property damage, fire or electric shock. HOW TO USE YOUR POLAR CUBETM UNPACKING INSTRUCTIONS AND IMPORTANT STEPS BEFORE FIRST USE! Remove ice maker from packaging materials and verify that all parts are included.
POLAR CUBE PARTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Control panel Display PCB Panel casing Inner liner Handle Ice shovel Ice casing Evaporator Water supply pipe (steel) Steel shell casing Switch component Cover with viewing window Left panel Filter Solenoid Refrigerant container 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31.
WIRING AND CIRCUIT DIAGRAM THIS DIAGRAM IS FOR REFERENCE ONLY! ATTEMPTING REPAIR BY UNQUALIFIED PERSONS MAY RESULT IN SERIOUS INJURY OR EVEN DEATH. NEVER ATTEMPT TO REPAIR OR SERVICE A MACHINE ON YOUR OWN. REPAIRS SHOULD ONLY BE CONDUCTED BY A QUALIFIED SERVICE PERSON OR ELECTRICIAN. DO NOT MODIFY ANY PART OF THIS MACHINE. ALWAYS UNPLUG BEFORE MAINTENANCE OR CLEANING.
TROUBLESHOOTING GUIDE Use caution and common sense when attempting to diagnose any problems you might be having with your ice maker. Please study the safety and operation precautions found earlier in this manual. If ice cubes are sticking together: Possible Causes: 1. Inner tank water temperature is too low. 2. Ice making cycle is too long. Solution 1. Change the inner tank’s water. Make sure the water is between 45-90 degrees F. 2. Stop the machine and allow the collected ice to melt.
