Instructions / Assembly

PAGE 4 OF 4
FIG. 10
FIG. 10A FIG. 10B
PAGE 5 OF 5
DO NOT USE THE RUMBLE SEAT WITHOUT SAFETY ATTACHING STRAPS IN PLACE.
IT IS ABSOLUTELY IMPERATIVE THAT THE SAFETY ATTACHING STRAPS BE INSTALLED AS
SHOWN IN STEP 9 TO PREVENT ACCIDENTAL OR UNINTENDED TILTING OF UTV BED!
SAFETY BELTS MUST BE WORN AT ALL TIMES WHEN SEATED IN THE RUMBLE SEAT.
TO THE OWNER/OPERATOR OF THE UTV: DO NOT ALLOW ANY PERSON TO SIT ON
RUMBLE SEATS WITHOUT HAVING THE SEATBELTS CONNECTED AND SECURED!
DO NOT EXCEED THE 300 LB. WEIGHT CAPACITY (TOTAL WEIGHT OF BOTH PASSENGERS)
OF THE RUMBLE SEAT.
For more information about this or other products, contact us at:
Great Day, Inc.
604 Kimbrough Dr. * Tallulah, LA 71282 * [phone] * www.greatdayinc.com
STEP 9: SEE FIG. 10 & FIG. 10A
ATTACH THE RUMBLE SEAT TO UTV
FRAME USING SAFETY ATTACHMENT
STRAPS. PUT LOOP ENDS AROUND
BACK OF RUMBLE SEAT FRAME AND
UTV ARM REST/SEAT FRAME. SEE
FIG. 10B - SECURE WITH QUICK
RELEASE BUCKLE.
**NOTE**THE RUMBLE SEAT MAY BE REMOVED FROM UTV BY REMOVING THE QUICK
PINS THAT SECURE THE FRAME TO THE MOUNTING BRACKETS.