Instructions / Assembly

FIG. 3
FIG. 4
FIG. 5
FIG. 6 FIG. 7
STEP 3-SEE FIGURE 4
REPLACE MAGNUM TRUCK N’ BUDDY
OVER DRILLED HOLES AND FASTEN
TO TAILGATE USING THE 15 MACHINE
SCREWS PROVIDED.
STEP 2-SEE FIGURE 3
REMOVE MAGNUM TRUCK N’ BUDDY
AND DRILL PILOT HOLES WHERE
MARKED USING A 1/8” DRILL BIT.
STEP 4-SEE FIGURE 5
ATTACH GRIP RAILS TO EACH SIDE
OF MAGNUM TRUCK N’ BUDDY
USING 4 - 1/4” X 1 3/4” BOLTS, FLAT
WASHERS AND LOCKNUTS. (2 EACH
PER GRIP RAIL)
STEP 5-SEE FIGURES 6 AND 7
UNHOOK BUNGIE SECURING STRAP TO UNFOLD MAGNUM TRUCK N’ BUDDY TO ITS
USABLE POSITION.