Instructions / Assembly

PAGE 2 OF 4
FIG. 2
FIG. 3
FIG. 4 (INSIDE MOUNT) FIG. 4A (OUTSIDE MOUNT)
STEP 2-MEASURE THE ROLL BAR
WIDTH ON YOUR TRACTOR OR
MOWER. MEASURE THE WIDTH OF
THE TRACTOR TOP FRAME. SEE FIG. 2
STEP 3-INSTALL MOUNTING
PLATES WITH OBLONG HOLES
TO CANOPY USING 5/16” BOLTS,
FLAT WASHERS, EXTERNAL
TOOTH LOCK WASHERS AND
LOCK NUTS PROVIDED.
**NOTE**EXTERNAL TOOTH
LOCK WASHERS MUST BE
INSTALLED BETWEEN
MOUNTING PLATES AND
CANOPY FRAME. **SEE FIG. 3
**NOTE**MOUNTING PLATES CAN BE MOUNTED TO THE INSIDE SEE FIG. 4 OR
OUTSIDE SEE FIG. 4A OF THE CANOPY FRAME TO ACCOMMODATE YOUR
ROLLBAR WIDTH. **