User Manual

Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [e-mail]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email [e-mail] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
WB 123 B
ROUND CAST IRON BASE FOR M20 POLES
FEATURES
• 10 kg round base made of cast iron
• M20 threaded flange
• Flat design
DESCRIPTION
This flat, heavy round base made of cast iron accepts extension tubes with
an M20 screw thread and ensures a secure footing with a weight of 10 kg. For
increased stability, a 5 kg weight disc is available as an accessory (item no.
GWB123WPB), which is easily assembled without tools.
VARI-WEIGHT® – patented stability system for secure holding and simple trans
-
portation by means of an insertable weight disc.
Product type Stands and Tripod Accessories
Type Base
Pedestal material Die-cast iron
Colour Black
Surface Powder coated
Diameter 450 mm
Threaded connector M20 female
Additional information 5 kg extra weight plate available
Weight 10 kg
SPECIFICATIONS