User Manual

Adam Hall GmbH · Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [e-mail]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and
assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other infor
-
mation from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declara
-
tions-GRAVITY_DE_EN_ES_FR.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email [e-mail] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indi
-
cates that this appliance may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled
to promote sustainable economic activity.
INTRODUCTION
This universal clamping system allows you to mic up a guitar cabinet in an easy
and revolutionary way. The spring-loaded clamping arm makes the clamp suitable
for almost any type of cabinet and securely fastens to the side or top of a cabinet
or combo amplier. Thanks to its adjustable edge grip, the clamp can be adjusted
to t snugly onto recessed edges. The rigid boom is nely adjustable in both boom
angle and microphone depth – this ensures a far more precise and secure mic
placement as opposed to using a gooseneck-based clamping system or conven
-
tional mic stand.
FEATURES
• Lightweight and compact
• Precise and secure mic placement
• Variable depth
• Adjustable edge grip
SPECIFICATIONS
MS CAB CL 01
CAB CLAMP MICROPHONE HOLDER FOR GUITAR CABINETS
Product type Microphone Accessories
Type Microphone Holder
Material Aluminium
Surface Powder coated
Colour Black
Clamping width 300 - 400 mm
Extension length 250 mm
Threaded connector 3/8 "
Weight 0.6 kg