User Manual

Gravity
®
is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: [phone] | adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email [e-mail] /
+49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
LS SUPER TB 01
SUPER MINI T-BAR FOR 35 MM TRIPODS
FEATURES
• Width adjustable from 390 - 570 mm
• 17 mm TV spigot insert
• Lamps can be attached from above or below
• Compatible with all 35 mm stands
• Built-in Allen key holder
DESCRIPTION
If you are a rental or installation company, DJ or solo entertainer, you have
almost certainly experienced this or a similar situation: You need two spot-
lights to illuminate a specific area. As a professional, you aspire to make your
construction discreet and attractive. Ideally it should not attract attention.
There are slimline, elegant stands for this, such as the LS 331 B from Gravity.
However, if you install a standard T-bar, the combination appears clumsy and
oversized. You don’t need a clavilux, just two spots.
The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this
problem: With its elegant construction and adjustable width of 390-570 mm,
it blends seamlessly into any environment, even museums and galleries.
Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into posi-
tion, removing the tedious requirement of securing them with screws and wing
nuts. Its flexible design enables lamps to be attached upright on the bar or
suspended from it. However, despite its slimline elegance, there has been no
compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical
load capacity is 20 kg per side. Spigot interval is adjustable from 330 - 515 mm.
And if you need another spot or two, extra spigot inserts can be installed in
the additional mounting holes.
As you are probably already aware, ergonomic locking screws, interchange-
able color rings and high-quality workmanship come as standard with all
Gravity products. The integrated Allen key holder is a small extra feature that
makes this T-bar even more user-friendly.
SPECIFICATIONS
Product number GLSSUPERTB01
Product type Lighting Stands
Type Stands and Tripod Accessories
Material Die-cast aluminum, Steel
Surface Powder coated
Color Black
Fitting Clamping screw 36 mm
Length 390 - 570 mm
stud spacing 330 - 515 mm
Max. load capacity 2 x 20 kg, balanced
Weight 1.7 kg