User Manual

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [e-mail]
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and
assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other infor-
mation from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
http://www.adamhall.com/media/shop/downloads/documents/manufac-
turersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email [e-mail] /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indi-
cates that this appliance may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled
to promote sustainable economic activity.
INTRODUCTION
The LS 331 B lighting stand features a large heavy steel base providing a rm
footing and a extension for a maximum height of 2.42 m. The 35 mm pole
includes a female threaded M10 insert, the base tube has a male M20 end. Two
integrated base handles facilitate transport.
FEATURES
• Large heavy steel base for stability
• 35 mm pole with M10 female thread
• 2.42 m maximum height
SPECIFICATIONS
Product type: lighting stand
Tubing material: steel
Colour: black
Surface: powder coating
Pole Diameter 35 mm with M10 female threaded insert
Max. Height. 2420 mm
Height Adjustment Type: set screw and say pin
Height Adjustment Collar: steel
Extensions: 1
Base: steel plate with M20 female thread
Base dimensions: 550 x 550 mm
Interchangeable Rings. yes
Black ring set included: yes
Weight. 17.8 kg
GLS331B
Lighting Stand with Square Steel Base