Data Sheet

RB-Gra-23
RJ11 Breakout Board
Looking for Microchip ICD breakout board? This board breakout MPLAB ICD3 or MPLAB REAL
ICE PIC programmer for ease of use.
This RJ11 breakout board bring all 6 pins of a 6P6C modular jack out to screw terminal blocks for easy
connection and prototyping work. The connections are also available via 0.1" header pins. We've
included a male header strip. You can solder it on the top and use with these female to male jumper
wires for breadboard connections. Or solder it on the bottom and use it directly on the breadboad.
This break out board is perfect for experimentation and prototype work, as well as for use in the
educational laboratory. It is well-suited for work with the telephone ports, data acquisition equipment,
and any other device that uses an RJ11/6P6C connector (i.e. ICD connector from MPLAB ICD3 or
REAL ICE PIC programmer). A breakout board is sometimes referred to as a "transition module",
"terminal board", or "interface module".
Features
• All 6pins of a RJ11onnector brought out to screw terminal blocks
• Additional male header pins breakout
• High quality PCB with blue soldermask
• Four mounting holes
• Breadboard friendly
• Board dimensions is 0.84" x 1.00"