Data Sheet

RB-Gra-10

8 Ch, 12 Bit, I2C Analog to Digital Converter

Product Description:

The I2C-ADC board is an I2C 12-bit, 8-CH Analog-to-Digital Converter module. The module can be

configured as a Single-Ended Inputs Mode or Differential Inputs Mode. There are no external

components required. Only two signal lines SDA and SCL plus supply voltage and ground are required

to be connected. This makes it perfect for embedded systems that require more input/output ports.

This board features innovations that set it apart from other ADC module. Innovations feature like on-

board I2C address jumpers, pull-up resistors, power LED and 2.5V reference. The module can be

quickly connected directly on to the breadboard. The board is small and compact in size 0.70 x 0.70

inches.

The I2C-ADC is designed base on ADS7828 IC. It is a single-supply, low-power, 12-bit data

acquisition device that features a serial I2C interface and an 8-channel multiplexer. The Analog-to-

Digital (A/D) converter features a sample-and-hold amplifier and internal, asynchronous clock. The

combination of an I2C serial, 2-wire interface and micropower consumption makes the

I2C-ADC ideal for applications requiring the A/D converter to be close to the input source in remote

locations and for applications requiring isolation.

Two jumper pins vary the fixed I2C address and allow up to four devices to share the same I2C bus.

That is total of 32 channels.

PAGE 1
RB-Gra-10 8 Ch, 12 Bit, I2C Analog to Digital Converter Product Description: The I2C-ADC board is an I2C 12-bit, 8-CH Analog-to-Digital Converter module. The module can be configured as a Single-Ended Inputs Mode or Differential Inputs Mode. There are no external components required. Only two signal lines SDA and SCL plus supply voltage and ground are required to be connected. This makes it perfect for embedded systems that require more input/output ports.
PAGE 2
Features: • Stand alone module, no external components required • On-board I2C address jumpers, pull-up resistors, power LED and 2.5V reference • Decoupling supply voltage • Design easy for breadboard • High quality double sided PCB • All SMT components • Small and compact in size 0.70 x 0.70 inches • Dual row 0.6” width, 0.1” pitch header pins • Operating power supply voltage range of 2.7V to 5V • Suitable for 3.3V or 5.0V microcontroller • 8-Channel multiplexer • 50kHz sampling rate • Internal 2.