Use and Care Guide

3. On irregular areas grid that do not fit can be disassemble (use rubber hammer) and leave

that small area to fill with gravel. To totally cover area with Gravalock grid assemble it

and cut the excess. It can be easily cut with a hacksaw, round saw, etc. Leave one inch

between grid and confinement.

4. Before filling Gravalock grid with gravel compact it the best way possible so it settles

above gravel base.

GRID FILL:

1. Simply fill Gravalock grid by pouring gravel with a wheelbarrow or directly from a truck

and spread with a shovel, rake, bobcat, backhoe depending on size installation.

2. Remove gravel excess and compact Gravalock system installed. Refill with more gravel

in empty spaces if necessary after compacting.

Maximum gravel size is 1 inch diameter. If a smoother finish is wanted use a smaller gravel

3/8 to 1 /2 inch diameter, we highly recommend 3/8 inch diameter gravel.

Gravalock grid can be filled with any kind of gravel to get a desired finish.

For more information please visit www.gravalock.com or