Operation Manual

41
The current input voltage and battery resistance can be
called up at any time by pressing the INC and DEC
buttons simultaneously.
Change the display with INC or DEC button to input
voltage, the battery resistance display and to the single
cell voltages and backwards.
Displaying the Input voltage can be very useful if you are
using your car’s battery as energy source for charging.
________________
________________Input Voltage
13.62V
DECINC
Input voltage and Battery resistance display
The battery resistance is one important value to determine the battery quality. Press any button
to return to the menu system. Internal resistance is displayed every 1 minute for 10 minutes
after charge starts (NiCd, NiMH) Internal resistance is displayed one time after 2 minutes after
discharges starts (NiCd, NiMH, LiIo, LiPo, LiFe).
Internal resistance is displayed every 1 minute after charge starts (LiIo, LiPo, LiFe). Internal
resistance on individual cell is displayed with the connected balancer cable (LiIo, LiPo, LiFe
cells). Internal resistance is not displayed in storage mode or if the charge voltage reaches CV
during operation. The cell voltage gap against cell average value is showing as bar.
________________
________________ Battery Res.
25.3m
Display the voltage of the single cells
DECINC
________________
________________1.
]]]]]]]]
]]]]]]]]
]]]] 4.153V
2.
]]]]]]]]
]]]]]]]]
]]]]
]]
]]
] 4.168V
________________
________________3.
]]]]]]
]]]]]]
]]] 4.053V
4. 0.000V
________________
________________5. 0.000V
6. 0.000V
________________
________________Input Voltage
13.62V
________________
________________ Battery Res.
2 5.3 m
The current input voltage and battery resistance can be
called up at any time by pressing the INC and DEC
buttons simultaneously.
Change the display with INC or DEC button to input
voltage, the battery resistance display and to the single
cell voltages and backwards.
Displaying the single cell voltages is useful to check the
single cell voltages.
Displaying the single cell resistance is useful to check the
single cell quality.
________________
________________7:
]]]]]]]]
]]]]]]]]
]]]] 4.133V
8:
]]]]]]]]
]]]]]]]]
]]]]
]]
]]
] 4.128V
________________
________________9:
]]]]]]
]]]]]]
]]] 4.013V
10: 0.000V
________________
________________11: 0.000V
12: 0.000V
_______________
1: 4.4 2: 4.5m
3: 5.0 4: 0.0m
5: 0.0 6: 0.0m
7: 4.2 8: 4.4m
9: 4.6 10: 4.8m
11: 0.0 12: 0.0m
_______________
_______________
_______________
_______________
_______________