Operation Manual

28
7. Program flowchart
6. Charge programs
The various facilities of the charger are divided up into four program groups which you can select by
holding the MODE button pressed in for two seconds. The sequence is shown in the flow chart
below.
Ni-Cd battery programs: charging, balancing cells.
Ni-MH battery programs: charging, balancing cells.
LiPo / LiIo / LiFe battery programs: charging cells.
Lead-acid battery programs: charging, trickle charge for stand-by operation.
NiCd
AUTOMATIC-
program
NiCd
MANUAL-
program
NiMH
AUTOMATIC-
program
NiMH
MANUAL-
program
Pb
MANUAL-
program
Lithium
MANUAL-
program
Lithium
type
select
NiCd
∆ ∆
∆ ∆
∆ delta-peak
trigger voltage
NiMH
∆ ∆
∆ ∆
∆ delta-peak
trigger voltage
MODE MODE MODE MODE
MODE MODE MODE MODE
MODE MODE
MODE (2 sec.)
MODE (2 sec.)
MODE
(2 sec.)
MODE
(2 sec.)
MODE
(2 sec.)
MODE
(2 sec.)
NiCd
balancing
program
MODE (2 sec.)
NiMH
balancing
program