User manual

7 8
◎ SPECIFICATIONS
- Connect the battery pack to a balance board. Without this connection, either the batteries
or the charger may be damaged.
- Do not charge a battery with a voltage below 2.8V per cell. If this type of battery is forced
to charge, the pack can be damaged and, in extreme cases, can result in a fire.
- The default charging current is 1C. Monitor the voltage and the temperature of batteries
during charging operations that may exceed 1C.
- Do not charge Lithium Polymer battery packs to values that exceed 4.2V per cell.
- Always disconnect the battery after charging. Allow the charger to cool between the charges.
- Do not charge the batteries inside a car. Never use a cigarette socket as a power source.
- Do not charge the batteries using a digital camera, a camcorder, or a cell phone, as the power
source.
- Please use insulating gloves during the handling of the batteries, the charger or the wires.
Failure to do so may cause personal injury, as the voltage differential between the input and the
output can result in the formation of sparks.
MODE SPECIFICATION (CH1) (CH2)
Power source
Display
Battery Type & Cells
Output
Balancing current
USB
Firmware upgrade
PC communication
Languages
Ext. Module socket
Motor Test socket
Servo Test socket
Speed Controller Setting
Memory
SMPS Docking Terminal
Dimension
Weight
Charge Current
Discharge Current
Sub Function
Cooling system
Cycling
11-28V PROternal DC Power Supply
(Docking system)
0.1~20.0A (100mA steps)
Max.500W-24V, Max.260W-12V
0.1~10.0A (100mA steps)
Max.60W
Servo Test, Motor Test, Warmer,
ESC setting
50x50x10mm x 2ea
Dynamic Cooling Fan
Discharge, Charge to Discharge /
Discharge to Charge /
Charge to Discharge
0.1~3.0A (100mA steps)
Max.30W
0.1~1.0A (100mA steps)
Max.5W
-
-
-
-
-
-
-
-
-
-
-
-
10 Memories
3.0” TFT LCD W/ Touch screen
2 Channels (1CH : Max.500W)
Max. 350mA
USB 5V output (5.0V 2.5A)
External Mini USB device
Data Logging
Optional (Basically English)
Futaba 3P socket
ZHR
Futaba 3P socket
Ext. Module socket
30 Memories
Yes
88.2x203.4x196.3mm /
3.47x8.00x7.73 inch
1160g / 40.92 oz
NiCd, NiMH / 1~32 cells
LiPo, LiFe, LiIo / 1~14 cells
Pb / 1~12 cells (2V/cell)
NiCd, NiMH / 1~8 cells
-
-
-
-
-
(2CH : Max.30W)
-
USB B-Type